DMAC (N,N-Dimethylacetamide, CAS 127-19-5) is a high-boiling, strongly polar aprotic solvent used across polymer, pharmaceutical, and electronics manufacturing. It's valued for its exceptional solvency toward resins and polymers - but as of 2025, it also carries new EU regulatory restrictions that anyone sourcing or handling it should know about.
Properties of N,N-Dimethylacetamide (DMAc or DMAC)
| Property | Value |
|---|---|
| Boiling point | 165°C (329°F) |
| Freezing point | −20°C (−4°F) |
| Flash point (closed cup) | 70°C (158°F) |
| Specific gravity | 0.94 |
| Vapor pressure | 2 mmHg |
| Molecular formula | C₄H₉NO (CH₃CON(CH₃)₂) |
| Molecular weight | 87.12 g/mol |
| Explosive limits | LEL 1.8% / UEL 11.5% |
| Water solubility | Miscible |
The DMAC boiling point of 165°C is notably high for a solvent of its molecular weight, which is exactly why it's chosen for high-temperature polymer processing (like wet spinning) where lower-boiling solvents would flash off too quickly. Combined with strong thermal and chemical stability, this high boiling point lets DMAC stay in the liquid phase through demanding industrial process conditions without breaking down or evaporating prematurely.
DMAC is a colorless liquid with a faint ammonia- or fish-like odor. It's fully miscible with water and most organic solvents (aromatics, esters, ketones, alcohols, ethers), and it's an excellent solvent for polyurethane and polyimide resins in particular - a key reason it's difficult to substitute in fiber and film manufacturing.
Industrial Applications of N,N-Dimethylacetamide (DMAc or DMAC)
- Polymer industry - A key solvent in polyacrylonitrile (PAN) fiber production (acrylics) and polyurethane manufacturing; also used in high-performance plastics and film production, particularly for wet-spinning processes.
- Electronics manufacturing - Used as a cleaning and stripping agent in LCD and semiconductor processing to remove photoresist residues, with relatively low corrosivity to equipment.
- Pharmaceutical synthesis - Used as a reaction solvent that can improve yield and purity in drug synthesis, including certain antibiotic and anticancer drug intermediates.
- Chemical synthesis - Serves as a reaction medium in acylation and condensation reactions, where its high solubility helps speed reactions and limit side-product formation.
- Other uses - Acid gas absorption (CO₂, H₂S), paint and coating formulation, and as an electrolyte additive in some lithium battery formulations.
Important: 2025 EU Regulatory Update
This is where buyers and formulators need current information, not outdated safety framing. On June 2, 2025, the European Commission adopted Regulation (EU) 2025/1090, adding DMAC (Entry 80) to Annex XVII of the REACH Regulation as a restricted substance. DMAC is classified as a Category 1B reproductive toxicant (based on developmental toxicity) and an acute toxicant, Category 4.
New occupational exposure thresholds under the restriction:
- 13 mg/m³ for inhalation exposure
- 1.8 mg/kg body weight/day for dermal exposure
The restriction applies at concentrations of 0.3% w/w or above. General compliance is required by December 23, 2026, with an extended deadline of December 23, 2029 for textile manufacturers using DMAC, to allow time for ventilation and process upgrades.
This matters because some older reference material - including product pages still circulating - describes DMAC simply as "low-toxicity." That characterization predates the 2025 restriction and no longer reflects its current regulatory classification in the EU. Buyers formulating for EU markets should confirm their supply chain accounts for the new exposure limits and restriction thresholds.
Material Compatibility Note
DMAC's strong solvency cuts both ways: it can dissolve or degrade polycarbonate and ABS plastics, so equipment, containers, and devices made from these materials (including some syringes and fittings) shouldn't be used with DMAC. Always check compatibility charts for seals, gaskets, and equipment components before use.
FAQs
What is the boiling point of DMAC?
The DMAC boiling point is 165°C (329°F) at standard atmospheric pressure, per NIOSH reference data. This high boiling point is central to why it's chosen for high-temperature polymer dissolution and spinning processes.
Is DMAC toxic?
DMAC is classified in the EU as a Category 1B reproductive toxicant and Category 4 acute toxicant as of the 2025 REACH restriction (Regulation (EU) 2025/1090). It's absorbed through skin, and chronic exposure has been linked to liver effects, with central nervous system effects reported at high exposure levels. It should be handled with appropriate ventilation, skin protection, and adherence to occupational exposure limits (NIOSH REL/OSHA PEL: 10 ppm TWA, skin notation).
Is DMAC the same as DMF (dimethylformamide)?
No, though they're closely related and often used for similar purposes. DMF (N,N-dimethylformamide) is a smaller, related aprotic solvent with a lower boiling point (153°C) and is also classified as an SVHC/reproductive toxicant in the EU. DMAC generally has somewhat better thermal stability and a higher boiling point, which affects which one is chosen for a given process.
Can DMAC be used in EU markets after the 2025 restriction?
Yes, but under stricter conditions. The restriction sets occupational exposure limits rather than banning the substance outright, so DMAC remains usable in permitted applications provided exposure stays within the new thresholds and compliance deadlines are met (2026 generally, 2029 for textile manufacturing).
What materials should not come into contact with DMAC?
Polycarbonate and ABS plastics are notable incompatibilities - DMAC can dissolve or degrade them. It's also incompatible with strong oxidizers and certain halogenated compounds in the presence of iron.





