Sodium Formate (CAS 141-53-7): Identity and Commercial Grades
Sodium formate is the sodium salt of formic acid. Its molecular formula is HCOONa, its CAS number is 141-53-7, and its molar mass is 68.01 g/mol. The substance is a white, odourless, hygroscopic crystalline solid with a water solubility of roughly 97 g per 100 mL at 20 °C and only limited solubility in ethanol. Three commercial grades dominate trade: a 92% technical powder, a 95–98% prilled or granular industrial grade, and 98%+ material used in food, feed and pharmaceutical applications. Because the largest volumes arise as a co-product of pentaerythritol and trimethylolpropane manufacture, availability follows the operating rates of those plants rather than a dedicated synthesis line.
Cost Structure Behind a Sodium Formate Quotation
Four cost blocks decide the level of an offer. First, the feed cost of formic acid and sodium hydroxide; formic acid is the dominant variable and is itself driven by methanol and carbon monoxide pricing. Second, the co-production credit or penalty a plant applies, which can move offers by 10–20% between sources. Third, crystal form and screening: prilled or granular material carries a premium over ground powder because of lower dusting and better flow. Fourth, moisture control: holding water at 0.5% instead of 1.0% requires additional drying energy and tighter bagging discipline.
| Grade | Typical assay (HCOONa) | Moisture | Principal outlet |
|---|---|---|---|
| Technical powder | ≥ 92.0% | ≤ 1.0% | Leather tanning, textile dyeing |
| Industrial prilled / granular | 95.0–98.0% | ≤ 0.5% | Oilfield brines, runway and road de-icing |
| Food / pharmaceutical grade | ≥ 98.0% | ≤ 0.3% | Preservative, buffer salt, intermediate |
How the Price Varies by Grade and Delivery Term
Bulk industrial material of 92–98% purity moving FOB from Chinese ports was assessed in the range of about 288–388 USD per metric ton during 2025, with full-container contracts at the low end of that band. Delivered CIF business into South and Southeast Asia was reported near 370–400 USD/t over the same period; the spread is ocean freight, insurance and port charges. Small lots of 1–5 t of the 98% grade typically price 15–30% above container-load FOB levels. Food and pharmaceutical grades are quoted per enquiry and usually run 40–70% above industrial material because of additional purification, documentation and segregated handling.
Specification Parameters to Verify on a Certificate of Analysis
| Parameter | Typical limit | Method |
|---|---|---|
| Assay, dried basis | 92.0–98.0% by grade | Acid–base titration |
| Water content | ≤ 0.5% (98 grade) | Karl Fischer, ASTM E203 |
| Sodium carbonate | ≤ 1.0% | Titrimetric |
| Sodium chloride | ≤ 0.5% | Argentometric titration |
| Water-insoluble matter | ≤ 0.1% | Gravimetric |
| pH, 10% aqueous solution | 8.0–9.0 | pH meter at 25 °C |
Packaging, Storage and Freight Economics
The default export pack is a 25 kg woven polypropylene bag with an inner polyethylene liner, giving 25 t per 20 ft container when palletised. One-tonne jumbo bags cut handling cost but reduce payload to about 20–22 t per container unless floor-loaded. The product is hygroscopic and cakes under humid conditions, so bags must remain sealed on a dry, ventilated floor away from mineral acids and strong oxidisers, which liberate formic acid on contact. Sodium formate is not classified as dangerous goods under the UN Model Regulations, so it ships as general cargo without a hazardous freight surcharge, which materially improves its cost position against liquid de-icers.
Frequently Asked Questions
Q: What is the price of sodium formate per ton?
A: Industrial grade of 92–98% purity was assessed at about 288–388 USD per metric ton FOB China during 2025, while delivered CIF business in Asia ran near 370–400 USD/t. Lots of 1–5 t price 15–30% above container-load orders, and food or pharma grades run 40–70% above industrial levels.
Q: Why do quotations from different suppliers differ so much?
A: The co-production credit of the plant, crystal form (prilled versus ground powder), moisture specification, order volume and delivery term all move the number. A 1.0% moisture powder and a 0.5% moisture prilled product are not interchangeable in cost, and FOB versus CIF pricing embeds freight and insurance.
Q: Is sodium formate hazardous for transport?
A: No. It is not classified as dangerous goods under the UN Model Regulations and normally ships as general cargo in 25 kg lined bags or one-tonne jumbo bags. Ordinary warehouse controls for a hygroscopic, mildly alkaline powder are sufficient.
Q: How should sodium formate be stored?
A: Keep it sealed in a dry, ventilated warehouse below 30 °C, away from mineral acids and strong oxidisers. Moisture pick-up causes caking and reduces free-flowing behaviour, and acid contact liberates formic acid vapour.
Q: Which analytical methods confirm the specification?
A: Purity by acid–base titration of the dried sample, moisture by Karl Fischer titration following ASTM E203, chloride by argentometric titration, and insoluble matter gravimetrically. A full certificate of analysis should accompany every lot.
Q: What is the difference between 92% and 98% sodium formate?
A: The 92% technical grade carries more moisture, carbonate and chloride and is used where salt load is tolerable, such as leather tanning and textile dyeing. The 98% grade holds water at or below 0.5% and is preferred for oilfield brines, de-icing blends and food or pharmaceutical use where the counter-ion load must stay low.





