Sep 23, 2025 Leave a message

Sodium Formate (CAS 141-53-7): Key Properties and Industrial Applica.

Sodium formate is a simple, low-cost carboxylate salt with surprisingly broad industrial importance. It is the immediate downstream product of carbon monoxide absorption in caustic soda and the starting point for several high-volume chemicals. This article provides a practical reference on sodium formate (CAS 141-53-7): its identity, properties, applications, and safe handling.

What Is Sodium Formate?

Sodium formate is the sodium salt of formic acid, with the chemical formula CHNaO2 and a molecular weight of 68.01. It is registered under CAS number 141-53-7 and EINECS number 205-488-0. As one of the simplest organic carboxylates, it consists of a single-carbon carboxylate anion paired with a sodium cation. At ambient conditions it is a white crystalline powder or granular solid with a slight odor of formic acid. The salt is mildly deliquescent and hygroscopic, so it absorbs moisture from humid air and must be kept in sealed packaging.

Key Physical and Chemical Properties

The following table summarizes the most relevant properties of sodium formate:

Property Typical Value
Chemical formula CHNaO2
Molecular weight 68.01
Appearance White to off-white crystalline powder
Melting point 259-262 °C
Boiling point 360 °C (decomposes)
Density 1.16 g/mL at 20 °C
pH of 5% solution 7.0-8.5 at 20 °C
Water solubility Soluble, up to about 8 M at 20 °C
Stability Stable; incompatible with strong oxidizers and strong acids

Sodium formate forms clear, colorless aqueous solutions and shows mildly alkaline behavior in water, which underlies its use as a buffering and pH-adjusting agent. It is hygroscopic, so exposure to humid air should be minimized, and it should be protected from moisture during storage and transport. The material is stable under normal conditions but reacts with strong oxidizing agents and strong acids.

How Sodium Formate Is Produced

The dominant industrial route to sodium formate is the absorption of carbon monoxide in concentrated sodium hydroxide solution under elevated temperature and pressure. The resulting sodium formate solution is concentrated and crystallized to yield the solid salt. This process is often integrated into plants that produce formic acid, because acidification of sodium formate with sulfuric acid releases formic acid and regenerates sodium sulfate as a by-product. The same route positions sodium formate as a convenient intermediate for oxalic acid and sodium hydrosulfite production.

Major Industrial Applications

Sodium formate serves as both an end-use chemical and an intermediate:

Production of formic acid: Acidification of sodium formate with sulfuric acid is a classic route to formic acid, widely used in silage preservation, leather processing, and textile dyeing.

Production of oxalic acid: Sodium formate can be converted to sodium oxalate by heating, followed by acidification to yield oxalic acid, which is used in cleaning, bleaching, and metal treatment.

Production of sodium hydrosulfite: Sodium formate is a feedstock for sodium hydrosulfite, a powerful reducing agent used in textile bleaching, paper pulp brightening, and mineral processing.

Dimethylformamide (DMF) production: Sodium formate participates in processes that yield DMF, a widely used aprotic solvent for synthetic fibers, coatings, and pharmaceutical processing.

Leather processing: As described in dedicated references, sodium formate acts as a masking and buffering agent in chrome tanning and neutralization, improving softness and color uniformity.

Other uses: Sodium formate is applied as a de-icing agent on roads and runways, as an additive in drilling fluids, and as a buffering agent in industrial formulations.

Handling, Storage, and Safety

Although sodium formate has low acute toxicity, correct handling is still required:

Store in sealed containers in a cool, dry warehouse, away from strong acids and strong oxidizing agents, which are incompatible with the salt.

Wear dust protection, gloves, and eye protection when handling powder to avoid irritation from dust or from the mildly alkaline solution.

Keep the product dry: because of its hygroscopic nature, opened bags should be resealed immediately and stock rotated on a first-in, first-out basis.

In case of skin or eye contact, wash with plenty of water; seek medical attention if irritation persists.

Dispose of waste in accordance with local regulations; sodium formate is water-soluble and biodegradable in dilute discharge.

Frequently Asked Questions

Is sodium formate the same as sodium acetate?

No. Sodium formate is the sodium salt of formic acid (single-carbon, CHNaO2), while sodium acetate is the sodium salt of acetic acid (two-carbon, CH3COONa). They differ in molecular weight, properties, and applications; sodium formate is primarily an intermediate and buffering agent, whereas sodium acetate is used in heating pads, buffer systems, and food preservation.

Is sodium formate hazardous?

Sodium formate has low acute toxicity but is mildly irritating to skin, eyes, and the respiratory tract as dust. It is incompatible with strong acids (releasing formic acid) and strong oxidizing agents. It is not classified as a carcinogen and is readily biodegradable, making it one of the milder industrial carboxylates.

Why is sodium formate used in de-icing products?

Sodium formate lowers the freezing point of water and is less corrosive to concrete, steel, and vegetation than chloride-based de-icers. It acts quickly at low temperatures and is biodegradable, which makes it attractive for airports, sensitive pavements, and environmentally protected areas.

What is the typical purity of industrial sodium formate?

Industrial grades typically assay at 95-98% min sodium formate, with the balance mainly water and small amounts of sodium carbonate or sodium chloride depending on the process. Higher-purity grades above 98% are available for applications such as leather auxiliaries and specialty synthesis, and the certificate of analysis should confirm assay, moisture, and chloride content.

Can sodium formate replace caustic soda for pH adjustment?

Not directly. Caustic soda is a strong alkali that raises pH rapidly, while sodium formate is a mild, buffering salt that stabilizes pH in a narrow range near neutrality. In leather neutralization and some process floats, its mild behavior is precisely the advantage, avoiding the pH overshoot and fiber damage that strong alkalis can cause.

How should sodium formate solutions be prepared?

Dissolve the crystalline salt in clean water with gentle agitation at ambient or slightly warm temperature; solubility is high, so most process concentrations are achieved easily. Solutions are mildly alkaline and stable for short periods, but should be prepared fresh for critical applications to avoid microbial or atmospheric contamination.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry