Oct 28, 2025 Leave a message

What Is the Difference Between DMAC and DMA?

DMAC and DMA are two abbreviations that appear constantly in solvent specifications, safety data sheets and technical literature. Understanding whether they refer to the same chemical or to different ones is essential for correct purchasing, handling and process design.

What Do DMAC and DMA Stand For?

DMAC is an unambiguous abbreviation for N,N-dimethylacetamide, a polar aprotic solvent with the CAS number 127-19-5. DMA is more ambiguous. In most solvent and polymer contexts, DMA is used interchangeably with DMAC to mean the same compound. However, in amine chemistry and agrochemical applications, DMA usually means dimethylamine (CAS 124-40-3), and in dye chemistry it can occasionally mean N,N-dimethylaniline. Because the same three letters can point to different substances, the CAS number is the only reliable identifier.

N,N-Dimethylacetamide (DMAC) at a Glance

Dimethylacetamide is a colorless, hygroscopic liquid with the formula C4H9NO and a molecular weight of 87.12 g/mol. It is completely miscible with water and with most organic solvents, boils at about 165 to 166 °C, and is produced by the reaction of dimethylamine with acetic acid or acetic anhydride. It dissolves many polymers, including acrylic and polyurethane systems, and is valued for its combination of high solvency, thermal stability and ease of recovery by distillation.

When DMA Means Dimethylamine

Dimethylamine has the formula C2H7N and the CAS number 124-40-3. At room temperature it is a gas with a strong ammonia-like odor, and it is usually handled as a 40% aqueous solution or as an anhydrous liquefied gas. It is a building block for rubber accelerators, agrochemicals, surfactants and pharmaceuticals, and it is also the raw material for DMAC production. The physical state alone distinguishes it clearly from DMAC: a liquid solvent versus a compressed gas.

Key Differences in Properties

Property N,N-Dimethylacetamide (DMAC) Dimethylamine (DMA)
CAS number 127-19-5 124-40-3
Molecular formula C4H9NO C2H7N
Physical state Colorless liquid Gas at room temperature
Boiling point About 165 to 166 °C About 7 °C
Odor Faint, amine-like Strong ammonia-like
Main use Polar aprotic solvent Chemical intermediate

How to Avoid Confusion in Specifications and SDS

Always write the full chemical name together with the CAS number, for example N,N-dimethylacetamide (DMAC, CAS 127-19-5)

On purchase orders and certificates of analysis, require the CAS number to be stated explicitly

In SDS review, verify the physical form, boiling point and hazard statements match the intended substance

In cross-border communication, remember that the abbreviation DMAc with a lowercase c is widely used for the acetamide, while DMA alone is ambiguous

If a document uses DMA without a CAS number, confirm the intended compound before handling

How DMAC Compares with NMP and DMSO

DMAC, N-methyl-2-pyrrolidone (NMP, CAS 872-50-4) and dimethyl sulfoxide (DMSO, CAS 67-68-5) are all polar aprotic solvents with high solvency power. DMAC is valued for its balance of solvency, thermal stability and relatively low boiling point, which simplifies solvent recovery by distillation. NMP has a higher boiling point of about 202 °C and is often chosen for high-temperature polymer processing, while DMSO is an extremely powerful solvent that also penetrates the skin readily and therefore demands stricter handling controls. Both DMAC and NMP are classified as reproductive toxicants in some jurisdictions, so regulatory status should be part of the solvent selection criteria.

Frequently Asked Questions

Is DMA the same as DMAC?

Often yes: in solvent and polymer contexts both abbreviations refer to N,N-dimethylacetamide. However, DMA can also mean dimethylamine or N,N-dimethylaniline in other contexts, so always confirm the CAS number.

What is the CAS number of DMAC?

N,N-Dimethylacetamide has the CAS number 127-19-5 and the molecular formula C4H9NO.

What is dimethylamine?

Dimethylamine (CAS 124-40-3, C2H7N) is a low-boiling gas with a strong ammonia-like odor, usually handled as a 40% aqueous solution, and used as an intermediate for rubber chemicals, agrochemicals and pharmaceuticals.

What is DMAC used for?

DMAC is used as a solvent for acrylic fiber spinning, pharmaceutical synthesis, electronics, film casting and polymer processing, where its high solvency and thermal stability are required.

How can I tell which chemical DMA refers to in a document?

Check the CAS number and the physical form stated in the document or SDS. A liquid with a boiling point near 165 °C is DMAC; a gas with a boiling point near 7 °C is dimethylamine.

Is DMAC the same as DMF?

No. DMF is N,N-dimethylformamide (CAS 68-12-2), while DMAC is N,N-dimethylacetamide (CAS 127-19-5). They are close relatives but distinct solvents with different boiling points and regulatory profiles.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry