What Is DMAC (Dimethylacetamide)?
Dimethylacetamide, commonly abbreviated as DMAC, is a polar aprotic solvent with the molecular formula C4H9NO and a molecular weight of 87.12. Its CAS registry number is 127-19-5. DMAC is a colorless, hygroscopic liquid that is fully miscible with water and with most organic solvents, which makes it a preferred reaction medium in the chemical, pharmaceutical, and fiber industries.
Boiling Point and Key Physical Properties
The boiling point of DMAC is 165 °C at standard atmospheric pressure, which corresponds to 329 °F. This relatively high boiling point allows DMAC to be used in high-temperature reactions and in processes where a slow evaporation rate is required.
| Property | Value |
|---|---|
| Boiling point | 165 °C (329 °F) |
| Melting point | -20 °C |
| Flash point | 70 °C |
| Density at 25 °C | 0.937 g/cm³ |
| Vapor pressure at 20 °C | 0.3 kPa |
| Molecular formula | C4H9NO |
Why the Boiling Point Matters in Industry
The high boiling point of DMAC is decisive for several applications. In fiber spinning, DMAC acts as a solvent for polyacrylonitrile and polyurethane, where the low volatility helps maintain a stable dope temperature. In pharmaceutical synthesis, DMAC dissolves polar and non-polar reactants alike, supporting reactions that require temperatures above 100 °C. In electronics, DMAC is used for stripping and cleaning processes that demand high solvency without rapid evaporation. Because DMAC can be recovered by vacuum distillation, its boiling point also enables efficient solvent recycling.
Safety and Handling Considerations
DMAC is a combustible liquid with a flash point of 70 °C. It should be stored in tightly sealed containers away from strong oxidizers and open flames. Prolonged skin contact should be avoided because DMAC can be absorbed through the skin; workers should wear impermeable gloves and protective clothing. Adequate ventilation is required because heating DMAC can release vapors. Personnel handling DMAC should follow the guidance of applicable safety data sheets and regional occupational exposure regulations.
Frequently Asked Questions
What is the boiling point of DMAC?
The boiling point of DMAC, or dimethylacetamide, is 165 °C at standard atmospheric pressure.
Is DMAC miscible with water?
Yes. DMAC is fully miscible with water and with most common organic solvents, including alcohols, ethers, and aromatic hydrocarbons.
What is DMAC mainly used for?
DMAC is widely used as a solvent for acrylic fibers, polyurethane resins, pharmaceutical intermediates, and in electronics manufacturing processes such as photoresist stripping.
What is the flash point of DMAC?
The flash point of DMAC is approximately 70 °C, and it is classified as a combustible liquid under standard hazard classification systems.
How should DMAC be stored?
DMAC should be stored in tightly sealed, corrosion-resistant containers in a cool, dry, well-ventilated area, away from oxidizers, acids, and ignition sources.
Is DMAC absorbed through the skin?
Yes. DMAC can be absorbed through the skin, so impermeable gloves and protective clothing should be worn when handling it.





