Nov 28, 2025 Leave a message

What Is the Boiling Point of Isopropyl Alcohol?

Boiling Point of Isopropyl Alcohol

The boiling point of isopropyl alcohol is about 82.5 degrees Celsius, with values of 82.3 to 82.5 degrees commonly reported depending on purity and measurement conditions. Its melting point is approximately minus 88.5 degrees Celsius, and its relative density is about 0.7855, lighter than water. The relative vapor density is about 2.07, meaning the vapor is heavier than air and tends to settle at low levels, which matters for ventilation design. The boiling point is why IPA evaporates quickly at room temperature, leaving no residue, which is the property that makes it valuable for cleaning and drying applications.

Physical and Chemical Properties

Isopropyl alcohol is a colorless, transparent liquid with an odor resembling a mixture of ethanol and acetone. It is highly soluble in water and dissolves readily in most organic solvents, including alcohols, ethers, benzene and chloroform. It is a flammable substance: its vapors can form explosive mixtures with air and ignite or explode upon contact with open flames or high heat. Because the vapor is heavier than air, it can travel along the ground to distant ignition sources, so storage and use areas must be well ventilated and free of ignition sources.

Solvent Applications

IPA is widely used as a solvent because of its miscibility with water, fatty compounds and many organic substances. It exhibits stronger solvency for lipophilic substances than ethanol, making it suitable for nitrocellulose, rubber, paints, shellac, alkaloids and other materials. It is also used in manufacturing paints, inks, extraction agents and aerosol propellants. In electronics, its high purity and low residue make it the preferred choice for cleaning circuit boards, semiconductors and optical components, where even minute impurities can compromise performance.

Medicine and Disinfection

Isopropyl alcohol possesses excellent bactericidal properties. Its 70 percent aqueous solution is widely used as a disinfectant in homes and hospitals, for skin disinfection, hand sanitization and sterilizing medical instruments. The 70 percent concentration is more effective than higher concentrations, because the water content helps the alcohol penetrate bacterial cell walls. IPA also serves as a preservative for biological samples and functions as a reaction medium in certain chemical processes.

Chemical Raw Material and Other Uses

IPA is a vital chemical intermediate for producing acetone, hydrogen peroxide, methyl isobutyl ketone, diisobutyl ketone, isopropylamine, isopropyl ether, isopropyl chloride and isopropyl esters of fatty acids. In fine chemicals it is used to produce isopropyl nitrate, isopropyl xanthate, triisopropyl phosphite and aluminum isopropoxide, plus pharmaceuticals and pesticides. Other applications include antifreeze, cleaning agents, gasoline blending additives, pigment dispersants, dyeing fixatives, anti-fogging agents and defoaming agents in water-based fracturing fluids.

Safe Handling

Store IPA in cool, well-ventilated areas away from ignition sources, in containers grounded against static. Keep containers sealed to prevent evaporation and vapor accumulation, and use explosion-proof electrical equipment in storage and handling areas. Wear appropriate personal protective equipment, including chemical goggles and impervious gloves, and ensure spill containment materials are available. In case of skin contact, rinse with plenty of water; in case of eye contact, flush and seek medical attention.

Frequently Asked Questions

What is the boiling point of isopropyl alcohol? about 82.5 degrees Celsius, with values of 82.3 to 82.5 degrees reported depending on purity and conditions.

Why is 70 percent IPA more effective as a disinfectant? The water content helps the alcohol penetrate bacterial cell walls, making the 70 percent solution more bactericidal than higher concentrations.

Is isopropyl alcohol flammable? Yes, its vapors form explosive mixtures with air and can ignite on contact with open flames or high heat.

What is IPA used for in electronics? Cleaning circuit boards, semiconductors and optical components, because of its high purity and residue-free evaporation.

What chemicals are made from IPA? acetone, hydrogen peroxide, isopropylamine, isopropyl ether, isopropyl esters and many fine chemical intermediates.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry