Nov 26, 2024 Leave a message

Butadiene Rubber (BR9000): Properties, Processing and Industrial Applications

What Is Butadiene Rubber (BR)?

Butadiene rubber, also called polybutadiene rubber or simply BR, is a synthetic diene elastomer produced by the polymerisation of 1,3-butadiene. Depending on the catalyst system used, the polymer chain contains different proportions of cis-1,4, trans-1,4 and vinyl-1,2 units, and the microstructure determines the balance of properties. High-cis grades, in which the cis-1,4 content is typically 96% or above, are the workhorses of the tyre industry.

Polybutadiene rubber is commonly indexed under the CAS Registry Number 9003-17-2. Its glass transition temperature is among the lowest of all commercial rubbers, which is the source of its outstanding low-temperature flexibility, and it is supplied as bales or light-coloured blocks for compounding.

Key Properties of the BR9000 Grade

Grade 9000 is a widely traded high-cis polybutadiene rubber. Its typical specification values are summarised below.

Product Polybutadiene rubber BR9000
Appearance Light-coloured block
Mooney viscosity ML(1+4) at 100 degrees C 45 plus or minus 4
Compound Mooney ML(1+4) at 100 degrees C 65 maximum
300% modulus at 145 degrees C, 35 min 8.0 - 13.0 MPa
Tensile strength at 145 degrees C, 35 min 14.2 MPa
Elongation at break at 145 degrees C, 35 min 450%

The moderate Mooney viscosity of this grade gives a good balance between processing behaviour on an open mill or in an internal mixer and the mechanical properties of the vulcanised compound.

Performance Advantages

High elasticity and resilience: low hysteresis means less energy is converted into heat during cyclic deformation.

Low-temperature flexibility: the very low glass transition temperature keeps the rubber flexible well below zero.

Abrasion resistance: high-cis polybutadiene improves tread wear performance when blended into tyre compounds.

Flex and fatigue resistance: resistance to crack growth under repeated bending suits belts, hoses and dynamic parts.

Ageing and water resistance: good retention of properties after exposure to water and to normal service ageing.

Low heat build-up: reduced internal heat generation extends the service life of heavy-duty components.

Main Application Areas

Butadiene rubber is used on its own or blended with other elastomers to upgrade their performance. Its principal end uses are:

Tyre manufacturing: tread compounds, sidewalls, carcass and bead components, where abrasion resistance and low heat build-up are decisive.

Rubber footwear: soles and other moulded parts requiring high resilience and wear resistance.

Belting and hoses: conveyor belting, transmission belts, hydraulic and industrial hoses.

Rubber sheet, tape and moulded goods: technical sheeting, gaskets, seals and general mechanical rubber goods.

Plastics modification: impact modification of polystyrene and ABS-type resins, and use in golf ball cores.

Blending and Processing Notes

Because of its low green strength, polybutadiene is rarely processed entirely on its own in demanding applications. It is usually blended with natural rubber, styrene-butadiene rubber or ethylene-propylene rubber to balance processing safety against dynamic performance. Typical benefits include improved fatigue resistance when blended with natural rubber and improved wear and rolling behaviour when blended with styrene-butadiene rubber.

Compounds are mixed in internal mixers or on open mills and are normally vulcanised with sulfur-based curing systems, often accelerated to match the cure rate of the other elastomers in the blend. Because the polymer is sensitive to oxidation, an antioxidant is generally added during mixing, and care is taken not to over-masticate the compound at high temperature.

Storage and Handling

Butadiene rubber bales should be stored in their original packaging on a dry, level surface, away from direct sunlight, heat sources, oils, solvents and ozone-generating electrical equipment. Stacking height should be limited to avoid deformation of the bales, and stores should be well ventilated. Under these conditions the material retains its processing characteristics for an extended period; stocks should be rotated so that older material is used first, and bales should be brought to workshop temperature before mixing.

Frequently Asked Questions

Q: What is butadiene rubber used for?
Butadiene rubber is used mainly in tyre manufacturing, rubber shoes, belting, hoses, technical rubber sheets and moulded goods, and as an impact modifier in plastics.

Q: What does BR9000 mean?
BR9000 is a grade designation for high-cis polybutadiene rubber with a Mooney viscosity ML(1+4) at 100 degrees C of about 45 plus or minus 4, suitable for general tyre and mechanical rubber goods compounding.

Q: Why is butadiene rubber blended with other rubbers?
It has low green strength on its own, so it is blended with natural or styrene-butadiene rubber to improve processing while upgrading resilience, abrasion resistance and low-temperature performance.

Q: What are the main advantages of butadiene rubber?
The main advantages are high elasticity, low-temperature resistance, abrasion resistance, flex and fatigue resistance, good ageing and water resistance, and low hysteresis with low heat build-up.

Q: How should butadiene rubber be stored?
Keep bales in the original packaging in a dry, ventilated store away from sunlight, heat, oils, solvents and ozone sources, limit stacking height and rotate stock on a first-in, first-out basis.

Q: Is butadiene rubber the same as styrene-butadiene rubber?
No. Butadiene rubber is a homopolymer of 1,3-butadiene, whereas styrene-butadiene rubber is a copolymer of butadiene and styrene with different balance of properties.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry