1,2-Ethanediol, Ethylene Glycol (EG), and Mono Ethylene Glycol (MEG) are one and the same compound: CAS 107-21-1, molecular formula C₂H₆O₂. If you've received quotes from two suppliers, one calling it "EG" and the other "MEG," you're looking at the same product under two different labels. The three names come from three different contexts - chemical nomenclature, general industry usage, and petrochemical trading - and knowing which is which saves a lot of back-and-forth during sourcing.
Molecular Structure and Formula
All three names point to the same structure: HOCH₂CH₂OH, a diol with two hydroxyl groups on adjacent carbons.
| Name | Formula | What the Name Reflects |
|---|---|---|
| 1,2-Ethanediol | C₂H₆O₂ | IUPAC name; "1,2" locates the two -OH groups |
| Ethylene Glycol (EG) | C₂H₆O₂ / (CH₂OH)₂ | Common name for the same diol |
| Mono Ethylene Glycol (MEG) | C₂H₆O₂ / HOCH₂CH₂OH | Trade name, distinguishes it from DEG/TEG |
None of these three carries a different carbon count, a different number of hydroxyl groups, or a different molecular weight. If a data sheet implies otherwise, that's an error in the document, not a real variant of the chemical.
Physical and Chemical Parameters
These numbers apply no matter which of the three names appears on your paperwork:
| Parameter | Value |
|---|---|
| CAS Number | 107-21-1 |
| EINECS Number | 203-473-3 |
| Molecular Formula | C₂H₆O₂ |
| Molecular Weight | ≈ 62.07 g/mol |
| Structural Formula | HOCH₂CH₂OH |
| Appearance | Colorless, transparent, viscous liquid; slightly sweet taste |
| Boiling Point | ≈ 197–198°C at atmospheric pressure |
| Key Properties | Hygroscopic, combustible, strong freezing-point depressant |
| Common HS Code | 2905310000 |
The hygroscopic and viscous nature of the liquid has a real effect on how it's shipped. Bulk loads need sealed tank containers or properly lined drums, since moisture pickup during transit or storage can knock fiber-grade material out of spec before it ever reaches the buyer.
Where It's Actually Used
What changes across applications isn't the chemical identity - it's the purity grade. The main uses are:
- Polyester and fiber production - reacted with purified terephthalic acid (PTA) to make PET resin, polyester fiber, and film. This is by far the biggest volume use globally.
- Antifreeze and coolants - automotive antifreeze, aircraft de-icing fluid, and heat-transfer fluids for HVAC and industrial cooling loops, all relying on the same freezing-point depression.
- Resins and coatings - a building block for alkyd resins and unsaturated polyester resins used in coatings, varnishes, and adhesives.
- Electrolytic capacitors - used as a solvent to suspend conductive salts.
- Textiles, paper, and leather - as a humectant to control moisture and softness.
CAS Numbers: What Actually Differs
The real distinction buyers need to check isn't EG vs. MEG - it's MEG vs. its heavier relatives, which are genuinely separate substances with their own CAS numbers:
| Product | Abbreviation | CAS Number | Formula | Main Use |
|---|---|---|---|---|
| Mono Ethylene Glycol | MEG | 107-21-1 | C₂H₆O₂ | Polyester fiber, antifreeze, resins |
| Diethylene Glycol | DEG | 111-46-6 | C₄H₁₀O₃ | Unsaturated polyester resin, plasticizers, lubricants |
| Triethylene Glycol | TEG | 112-27-6 | C₆H₁₄O₄ | Natural gas dehydration, printing ink solvent |
Confirm the CAS number on the COA against the product you actually ordered. That single check catches far more real problems than debating whether "EG" or "MEG" is the correct term.
Purity Grades and What to Specify
Once the naming question is settled, the actual sourcing decision comes down to grade:
| Grade | Typical Purity | Used For | What to Check |
|---|---|---|---|
| Fiber-grade / polyester-grade MEG | ≥ 99.8–99.9% | PET resin, polyester fiber | UV transmittance, trace aldehyde levels |
| Industrial-grade EG | ≥ 99.5% | Resins, general industrial use | Water content, color (Pt-Co scale) |
| Antifreeze-grade EG | ≥ 99% | Automotive/industrial cooling systems | Compatibility with additive packages |
Before finalizing an order, ask for a Certificate of Analysis (COA), an MSDS/SDS, and - for larger shipments - a third-party inspection report such as SGS. If the cargo is heading into the EU, confirm REACH registration status as well. Packaging is usually 220kg steel drums or bulk ISO tank containers; which one makes sense depends on your own storage setup, not just on price per ton.
Handling and Storage
It's combustible and it absorbs moisture readily, so normal industrial precautions apply: PPE, decent ventilation, and following the relevant safety regulations when transferring or handling it. It isn't classified as highly acutely toxic, but prolonged or high-dose exposure can still cause health problems, so this isn't a product to get casual about. For storage, keep drums or tanks sealed, in a cool dry area away from ignition sources. Moisture getting into a container is one of the more common, and more preventable, reasons a fiber-grade batch ends up failing spec.
FAQ
Are 1,2-Ethanediol, Ethylene Glycol, and MEG the same chemical?
Yes - same compound, CAS 107-21-1, C₂H₆O₂. The three names reflect different contexts (systematic, common, and trade naming), not different substances.
Why call it "Mono" Ethylene Glycol if it's identical to EG?
The "Mono" prefix separates it from Diethylene Glycol (DEG) and Triethylene Glycol (TEG), which are heavier, genuinely different compounds in the same product family.
What's the real difference between MEG and DEG?
Different CAS numbers (107-21-1 vs. 111-46-6), different formulas, and different end uses. This is the distinction that actually matters for procurement - unlike the EG/MEG naming split.
Can fiber-grade MEG substitute for industrial-grade EG, or vice versa?
Not really recommended. Fiber-grade carries tighter limits on impurities and UV transmittance that industrial-grade material isn't held to.
What paperwork should I ask for before buying MEG?
A COA and MSDS/SDS at minimum. For EU-bound shipments, confirm REACH registration, and for larger orders, a third-party SGS report is standard practice.
Does the boiling point or purity change depending on which name is on the paperwork?
No. Since all three names describe the same molecule, the physical and chemical data - boiling point, molecular weight, CAS number - stay identical regardless of which term appears on the document.





