Polyaluminum chloride (PAC) is a high-efficiency flocculant widely recognized in the water treatment industry. With its unique chemical structure and superior performance, PAC is extensively used in wastewater treatment, drinking water purification, and industrial circulating water systems. This article explains why PAC is used in water treatment, how it works, and where it delivers the greatest value.
What Is Polyaluminum Chloride (PAC)?
Polyaluminum chloride, abbreviated PAC, is a pre-hydrolyzed inorganic polymer coagulant with the general formula Aln(OH)mCl3n-m. It is a family of aluminum salts in which a portion of the chloride is replaced by hydroxyl groups, forming multi-nuclear aluminum species with high positive charge. PAC is available as a liquid solution or as a powder, with the CAS number 1327-41-9. Its pre-polymerized structure is the key to its superior coagulation performance compared with simple aluminum salts.
How PAC Works in Water Treatment
In water treatment processes, PAC works through a combination of coagulation, adsorption, and precipitation reactions. The positively charged polynuclear aluminum species neutralize the negative charges on colloidal particles and suspended solids, which allows the particles to approach one another. The polymer chains then bridge the destabilized particles into larger flocs, which settle rapidly or can be removed by filtration. This mechanism effectively removes turbidity, color, organic matter, bacteria, and heavy metal ions, making PAC an excellent solution for both municipal and industrial applications. Because the aluminum species are already partially hydrolyzed, PAC performs well over a wider pH range and at lower water temperatures than conventional coagulants.
Key Advantages of PAC as a Coagulant
Low dosage requirement: PAC typically requires a smaller dose than traditional coagulants such as aluminum sulfate, with typical dosage reductions reported in practice of 30% or more for equivalent performance.
Wide pH tolerance: PAC works effectively over a broader pH range, reducing the need for pH adjustment chemicals.
Good low-temperature performance: PAC maintains coagulation efficiency in cold raw water, where conventional coagulants often perform poorly.
Rapid floc formation: PAC produces dense, fast-settling flocs, shortening settling time and reducing sludge volume.
Lower residual aluminum: the optimized speciation of PAC can help keep residual aluminum concentrations low in treated drinking water.
Cost-effectiveness: lower dosage and reduced auxiliary chemical consumption can lower overall treatment costs.
Main Applications of PAC
Drinking water purification: PAC removes suspended solids, color, odor, and other impurities from raw water efficiently, and is suitable for treating river water, reservoir water, and groundwater.
Industrial wastewater treatment: PAC is effective for wastewater from textile dyeing, leather processing, papermaking, and oil-containing effluent, as well as for fluoride-containing water and heavy metal removal.
Municipal sewage treatment: PAC is used to enhance primary and tertiary treatment, improving solids removal and reducing organic load before discharge.
Other uses: PAC extends to papermaking sizing, sugar refining, casting and molding, and industrial circulating water systems, where convenient handling and storage make the powder form particularly suitable.
Selection and Dosage Considerations
The optimum PAC dosage depends on raw water quality, turbidity, pH, temperature, and the required effluent standard. Jar tests are the standard method for determining the best dose and for comparing PAC with alternative coagulants for a specific water source. PAC is generally added at the rapid-mix stage, followed by flocculation and sedimentation or dissolved-air flotation, and finally filtration. For drinking water applications, the product used must comply with the applicable national standard for polyaluminum chloride, and operators should verify parameters such as basicity, aluminum content, and heavy metal limits before use.
Frequently Asked Questions
What is polyaluminum chloride used for?
Polyaluminum chloride is used as a coagulant in drinking water purification, industrial wastewater treatment, municipal sewage treatment, and industrial circulating water systems. It is also used in papermaking sizing, sugar refining, and casting processes.
How does polyaluminum chloride purify water?
PAC neutralizes the negative charges of colloidal particles, bridges them into large flocs through adsorption, and removes them by sedimentation or filtration. This coagulation-flocculation process removes turbidity, color, organic matter, and heavy metals.
Is PAC safe for drinking water treatment?
Yes, when the product complies with the applicable standard for drinking-water-grade polyaluminum chloride, PAC is approved for potable water treatment. Operators must verify that heavy metal impurities and residual aluminum meet regulatory limits.
How much PAC should be used in water treatment?
There is no universal dose. The optimum dose depends on water quality and is determined by jar testing. Typical doses range from a few to tens of milligrams per liter, and PAC usually requires less than conventional aluminum sulfate for the same result.
What is the difference between PAC and alum?
PAC is a pre-hydrolyzed polymer with higher charge density and better performance at low temperature and over a wide pH range, while alum (aluminum sulfate) is a simple salt that requires more alkalinity and is more sensitive to temperature and pH. PAC typically needs a smaller dose and produces less sludge.
How should PAC be stored?
Store PAC powder in a dry, ventilated warehouse, away from moisture and rain, and keep containers sealed. Liquid PAC should be stored in corrosion-resistant tanks and protected from freezing. Avoid contact with eyes and skin, and rinse with water if contact occurs.





