Acrylamide and polyacrylamide share a name but differ fundamentally in structure, properties, and use. Understanding the difference is essential for procurement decisions, safety compliance, and application selection in water treatment, mining, and industrial processing. This article compares the two substances across their chemistry, physical properties, classification, applications, and safety profiles.
What Is Acrylamide?
Acrylamide is a white, odorless crystalline substance with the chemical formula C3H5NO and a molecular weight of 71.08. Its CAS number is 79-06-1. The molecule contains a vinyl group attached to an amide group, which makes it highly reactive and readily polymerizable. Key physical data include a density of approximately 1.32 g/cm3, a melting point near 84.5 °C, and a tendency to absorb moisture from the air even after standard drying.
Because of its high reactivity, acrylamide is handled mainly as an industrial intermediate. It is also a substance of regulatory concern: it is classified as a probable human carcinogen and a neurotoxicant, and it forms in starchy foods cooked at high temperatures above about 120 °C through the Maillard reaction. Occupational exposure must therefore be tightly controlled.
What Is Polyacrylamide?
Polyacrylamide (PAM) is a water-soluble linear polymer produced by the free-radical polymerization of acrylamide monomers. Its CAS number is 9003-05-8. Depending on the production route, PAM is supplied as dry powder, emulsion, or colloidal forms. It exhibits excellent flocculating properties: long polymer chains bridge suspended particles, causing them to aggregate and settle, and the polymer also significantly lowers the resistance between fluids during flow, which is exploited in enhanced oil recovery and friction reduction.
PAM is generally insoluble in most common organic solvents such as methanol, ethanol, acetone, ether, and hydrocarbons. It can dissolve in certain polar organic media, including acetic acid, ethylene glycol, glycerol, molten urea, and formamide, but often requires heating, which limits practical use in those media.
Classification Systems for Polyacrylamide
PAM is classified along two independent axes:
By molecular weight: low molecular weight (below 1 million), medium molecular weight (2-4 million), and high molecular weight (above 7 million). Higher molecular weight grades give stronger flocculation and viscosity effects.
By ionic character: non-ionic, anionic, cationic, and amphoteric types. Anionic grades are common in mineral processing and wastewater clarification, cationic grades in sludge dewatering and papermaking, and non-ionic grades where charge interference must be avoided.
The choice of ionic type and molecular weight determines performance in each application, so the two axes must be considered together when specifying a PAM grade.
Key Differences at a Glance
| Feature | Acrylamide | Polyacrylamide |
| Chemical nature | Monomer (C3H5NO) | Polymer (repeating acrylamide units) |
| CAS number | 79-06-1 | 9003-05-8 |
| Physical form | White crystalline powder | Powder, emulsion, or gel |
| Water solubility | Highly soluble | Soluble, forms viscous solutions |
| Primary use | Raw material for polymerization and synthesis | Flocculant, thickener, friction reducer |
| Toxicity profile | Neurotoxic, suspected carcinogen | Low acute toxicity; residual monomer is the main concern |
Applications of Acrylamide and Polyacrylamide
The two substances serve completely different roles in industry:
Acrylamide: used almost exclusively as a chemical intermediate for producing polyacrylamide and copolymers, and as a reagent in laboratory and specialty synthesis. It has no direct end-use as a product additive because of its toxicity.
Polyacrylamide: widely applied in water and wastewater clarification, sludge dewatering, papermaking as a retention and drainage aid, mineral processing as a flocculant, soil conditioning, and internal coating of pipelines. In oil fields, high-molecular-weight PAM is used for polymer flooding and friction reduction in hydraulic fracturing.
Safety Considerations
Acrylamide is classified as toxic by ingestion, skin contact, and inhalation, and repeated exposure can cause peripheral neuropathy. Workplaces that handle acrylamide must use enclosed systems, local exhaust ventilation, and personal protective equipment, and must monitor air concentrations against occupational exposure limits. The EU and other regulators restrict residual acrylamide in food-contact polyacrylamide products; food-grade PAM is manufactured to keep residual monomer below the permitted threshold, typically 0.05% or lower, and water-treatment grades are certified accordingly.
Frequently Asked Questions
Is acrylamide the same as polyacrylamide?
No. Acrylamide is a small reactive monomer (C3H5NO, CAS 79-06-1), while polyacrylamide is a large polymer made from many acrylamide units linked together (CAS 9003-05-8). The monomer is toxic and reactive; the polymer is a safe, high-molecular-weight flocculant when residual monomer is controlled.
Can polyacrylamide be used in drinking water treatment?
Yes, but only grades certified for potable water use. Drinking-water-grade PAM must meet residual acrylamide limits set by national standards and WHO guidelines, typically no more than 0.05% residual monomer, and it is dosed at low concentrations as a flocculant aid in clarification.
Why is acrylamide found in food?
Acrylamide forms naturally when starchy foods are cooked at high temperatures, generally above 120 °C, through the Maillard reaction between reducing sugars and the amino acid asparagine. It appears in fried, roasted, and baked potato products, bread crusts, and coffee. This is a chemical reaction during cooking, not an added ingredient.
How do anionic and cationic polyacrylamide differ in use?
Anionic PAM carries negative charges and works best with positively charged or neutral particles, which is why it dominates in mineral processing, coal washing, and municipal wastewater clarification. Cationic PAM carries positive charges and is preferred for negatively charged organic sludges, making it the standard choice for sludge dewatering and paper mill effluent treatment.
What is the typical dosage of polyacrylamide in wastewater treatment?
Typical dosages range from 1 to 10 mg/L for municipal wastewater clarification and from 50 to 200 g per ton of dry solids for sludge dewatering, depending on solids content and sludge type. Jar tests should always be performed to determine the optimum dose and molecular weight for the specific water matrix.
How should acrylamide be stored and handled?
Store acrylamide in sealed containers in a cool, dry, ventilated area, away from oxidizers, acids, and polymerization initiators. Handle it in a fume hood or with local exhaust, wear protective gloves and clothing, and avoid generating dust. Emergency showers and eyewash stations should be available where acrylamide is handled.





