The p-xylene CAS number is 106-42-3. p-Xylene is also known as para-xylene or 1,4-dimethylbenzene. Its EC number is 203-396-5, and its molecular formula is C₈H₁₀.
p-Xylene is a colorless, flammable liquid with a characteristic sweet odor. It is mainly used as a feedstock for producing terephthalic acid and purified terephthalic acid (PTA), which are important raw materials for PET polyester production.

p-Xylene CAS Number and Chemical Formula
The CAS number of p-xylene is 106-42-3. The chemical identification of para-xylene is as follows:
| Property | Value |
|---|---|
| Chemical name | p-Xylene |
| Other name | Para-xylene |
| CAS number | 106-42-3 |
| EC number | 203-396-5 |
| IUPAC name | 1,4-Dimethylbenzene |
| Chemical formula | C₈H₁₀ |
| Molecular weight | 106.17 g/mol |
The p-xylene chemical formula is C₈H₁₀. Its structural formula can also be written as C₆H₄-1,4-(CH₃)₂, indicating that the two methyl groups are located at the 1 and 4 positions of the benzene ring.
If you are searching for p-xylene CAS 106-42-3, CAS 106-42-3 and para-xylene refer to the same chemical substance.
What Is p-Xylene?
p-Xylene is the para isomer of xylene, also called 1,4-dimethylbenzene.
Xylene has three structural isomers:
- o-Xylene - 1,2-dimethylbenzene
- m-Xylene - 1,3-dimethylbenzene
- p-Xylene - 1,4-dimethylbenzene
The position of the two methyl groups distinguishes these three isomers. p-Xylene has a relatively high melting point compared with the other xylene isomers, which is one of its distinguishing physical properties.
For chemical procurement, it is important to specify p-xylene / para-xylene rather than simply "xylene" when a particular isomer is required.
Physical Properties of p-Xylene
The main p-xylene physical properties include a molecular weight of 106.17 g/mol, a melting point of approximately 12–13°C, and a boiling point of about 138°C.
| Physical property | Typical value |
|---|---|
| Molecular weight | 106.17 g/mol |
| Melting point | 12–13°C |
| Boiling point | About 138°C |
| Flash point | About 27°C |
| Water solubility | Practically insoluble |
| Vapor pressure | About 9 mmHg at 20°C |
| Vapor density | About 3.7 (air = 1) |
p-Xylene is practically insoluble in water but is soluble in many common organic solvents, including alcohol, ether, acetone, benzene, and chloroform.
It is also a flammable liquid. Because its vapor is heavier than air, storage and handling areas should have appropriate ventilation and controls based on the product SDS.
What Is p-Xylene Used For?
The main p-xylene use is the production of terephthalic acid and related polyester intermediates.
Major downstream products include:
- Purified terephthalic acid (PTA)
- Terephthalic acid (TPA)
- Dimethyl terephthalate (DMT)
Among these applications, PTA production is particularly important. PTA is combined with monoethylene glycol (MEG) to produce polyethylene terephthalate (PET).
The basic downstream chain is:
p-Xylene → PTA → PET
PET is used in polyester fibers, bottles, packaging materials, films, and other polyester products.
Why Is p-Xylene Used to Make PTA?
p-Xylene is oxidized to produce terephthalic acid, which can then be processed into purified terephthalic acid (PTA).
PTA is an important feedstock for PET production. This gives p-xylene a direct connection to the polyester, PET resin, packaging, and synthetic fiber industries.
For this reason, p-xylene demand is closely associated with downstream PTA and polyester production.
p-Xylene vs. o-Xylene vs. m-Xylene
The three xylene isomers have the same molecular formula, but the methyl groups occupy different positions on the benzene ring.
| Xylene isomer | Common name | CAS number | Structure |
|---|---|---|---|
| o-Xylene | Ortho-xylene | 95-47-6 | 1,2-dimethylbenzene |
| m-Xylene | Meta-xylene | 108-38-3 | 1,3-dimethylbenzene |
| p-Xylene | Para-xylene | 106-42-3 | 1,4-dimethylbenzene |
This difference in molecular structure affects their physical properties and industrial applications.
p-Xylene should not be treated as the same product as mixed xylene. Mixed xylene is a mixture of xylene isomers and other aromatic components, while p-xylene specifically identifies the para isomer.
p-Xylene for Industrial Buyers
When purchasing p-xylene CAS 106-42-3, buyers should check the product specification rather than relying only on the chemical name.
The following information is normally relevant to an industrial p-xylene purchase:
- Purity
- Isomer composition
- Impurity limits
- COA
- SDS
- TDS
- Packaging
- Net weight per package
- Available quantity
- Lead time
- Country of origin
- Incoterm
- Delivery location
For high-purity applications, the agreed specification and impurity limits should be confirmed before an order is placed. The supplier's COA should also be checked against the agreed specification for each shipment.

Frequently Asked Questions About p-Xylene
What is the CAS number of p-xylene?
The CAS number of p-xylene is 106-42-3.
What is the CAS number of para-xylene?
The para-xylene CAS number is 106-42-3. Para-xylene and p-xylene are two names for the same compound.
What is p-xylene CAS 106-42-3?
p-Xylene CAS 106-42-3 is 1,4-dimethylbenzene, an aromatic hydrocarbon primarily used as a feedstock for PTA and other terephthalic acid products.
What is the chemical formula of p-xylene?
The p-xylene chemical formula is C₈H₁₀. Its molecular weight is 106.17 g/mol.
What is p-xylene mainly used for?
The main p-xylene use is PTA production. PTA is subsequently used with MEG to manufacture PET polyester.
Is para-xylene the same as p-xylene?
Yes. Para-xylene and p-xylene are the same chemical compound, with the IUPAC name 1,4-dimethylbenzene and CAS number 106-42-3.
What is the difference between p-xylene and mixed xylene?
p-Xylene is a specific xylene isomer with CAS 106-42-3. Mixed xylene is a mixture containing different xylene isomers and other aromatic components. They therefore have different compositions and may serve different industrial applications.
Conclusion
The p-xylene CAS number is 106-42-3, and its chemical formula is C₈H₁₀. Also called para-xylene and 1,4-dimethylbenzene, p-xylene is primarily used as a feedstock for producing PTA, TPA, and DMT.
For industrial procurement, buyers should confirm the required purity, composition, documentation, packaging, and delivery terms before purchasing p-xylene CAS 106-42-3.





