Propylene glycol is a colourless, odourless and slightly sweet viscous liquid that mixes freely with water and most polar solvents. Also known as 1,2-propanediol or MPG, it sits between ethylene glycol and glycerine in behaviour: it offers good solvency and freeze protection while having a markedly lower toxicity profile than ethylene glycol. That combination has made it a workhorse ingredient in food, pharmaceutical, cosmetic and industrial formulations.
What Is Propylene Glycol?
Propylene glycol is a diol with the chemical formula C3H8O2, a molecular weight of 76.09 g/mol and CAS number 57-55-6. It has a boiling point near 187 °C, a melting point near -60 °C and a density of about 1.036 g/mL. It is miscible with water, ethanol, ether, chloroform and acetone, but is insoluble or only slightly soluble in hydrocarbons, chlorinated hydrocarbons and oils.
The molecule contains two hydroxyl groups on adjacent carbon atoms, which is why it hydrogen-bonds strongly with water and acts as both a humectant and a coupling solvent. It is not a strong acid or base and remains chemically stable under normal storage conditions.
Typical Properties
| Property | Typical value |
|---|---|
| Chemical name | Propylene glycol (1,2-propanediol) |
| CAS number | 57-55-6 |
| Molecular formula | C3H8O2 |
| Molecular weight | 76.09 g/mol |
| Appearance | Clear, colourless, odourless liquid |
| Boiling point | about 187 °C |
| Melting point | about -60 °C |
| Density | about 1.036 g/mL at 20 °C |
| Solubility | Completely miscible with water, alcohols and many organic solvents |
How Propylene Glycol Is Made
Propylene glycol is produced commercially by the hydratation of propylene oxide, a reaction that yields both mono-propylene glycol (MPG) and di-propylene glycol (DPG). MPG is the dominant commercial form and is the grade most often bought as propylene glycol. DPG, the by-product, is used as a solvent and in unsaturated polyester resins.
Purification by distillation separates the glycols and removes water and low-boiling impurities. The final grade is defined by specification rather than by process: pharmaceutical material must meet United States Pharmacopeia and European Pharmacopoeia monographs, food-grade material must meet food chemicals codex requirements, and technical grades are specified against industrial performance needs.
Main Applications
Food: used as an emulsifier that helps oil and water phases mix, as a solvent for flavourings and colours, as a humectant that keeps products from drying out, and in some applications as an antifreeze that prevents food from freezing.
Pharmaceuticals: the USP and EP grades act as solvents and softening agents in ointments, creams and oral liquids, improving the permeability and absorption of active ingredients, and serving as antimicrobial and humectant components.
Cosmetics and personal care: used as a solvent and skin-conditioning agent that improves the stability and spreadability of creams, lotions, toothpaste and soaps, and blended with glycerine or sorbitol as a humectant.
Unsaturated polyester resins: MPG supplies the diol component in resin synthesis for gel coats, castings and composites.
De-icing and heat transfer: propylene glycol de-icing fluid is used in aviation and ground maintenance to prevent freezing on aircraft surfaces and runways, and the same base fluid serves in closed-loop heat transfer systems.
Industrial cleaning: cleaning solutions based on propylene glycol are valued for their efficiency and low toxicity, making them suitable for sensitive environments.
Grades, Quality Control and Packaging
Three grade families are normally traded: pharmaceutical USP and EP grades for medicines, food-grade material meeting food chemicals codex requirements, and technical or industrial grades. Typical certificates of analysis report assay by gas chromatography, water content, colour, specific gravity and limits for glycol impurities such as diethylene glycol and ethylene glycol, which are critical for pharmaceutical and food use.
Propylene glycol is packed in 215 kg steel drums, in 1000 L intermediate bulk containers and in ISO tanks for bulk shipments, with small quantities supplied in 1 kg or 5 kg containers. Tanks and lines should be made of stainless steel or lined carbon steel, and the product should be stored in tightly closed containers in a cool, dry, well-ventilated area away from strong oxidising agents. Because it is hygroscopic, containers should be resealed after use to prevent moisture pickup.
Frequently Asked Questions
Q: What is propylene glycol?
Propylene glycol, also called 1,2-propanediol, is a water-miscible diol with the formula C3H8O2 and CAS number 57-55-6, used as a humectant, solvent and antifreeze.
Q: Is propylene glycol the same as ethylene glycol?
No. They are different chemicals with different toxicity profiles; propylene glycol is far less toxic and is permitted in food, pharmaceutical and cosmetic applications.
Q: How is propylene glycol produced?
It is made by hydrating propylene oxide, which yields mono-propylene glycol as the main product and di-propylene glycol as a co-product, followed by distillation to the required grade.
Q: What are the main industrial uses of propylene glycol?
It is used in food as an emulsifier and humectant, in pharmaceuticals and cosmetics as a solvent, in unsaturated polyester resins as a diol, and in de-icing fluids and heat transfer systems.
Q: What is the difference between MPG and DPG?
MPG is mono-propylene glycol, the standard commercial grade, while DPG is di-propylene glycol, a higher-boiling co-product used mainly as a solvent and resin intermediate.
Q: How should propylene glycol be stored?
Keep it in tightly closed stainless steel or lined containers in a cool, dry, ventilated area away from strong oxidising agents, and reseal containers after use because the product absorbs moisture.





