Ethylene glycol, also called mono ethylene glycol or MEG, is a clear, colorless liquid diol produced from ethylene oxide. It ranks among the highest-volume industrial chemicals made anywhere because its properties map directly onto essential applications in antifreeze, coolants, heat transfer, and polyester production. Understanding those properties is the key to specifying the right grade and using it correctly.
What Is Ethylene Glycol?
Ethylene glycol has the chemical formula C2H6O2, the CAS number 107-21-1, and a molecular weight of 62.07. Structurally, it is about as simple as organic chemistry gets: a two-carbon chain with a hydroxyl group on each end. That detail, two hydroxyl groups instead of one, explains most of what follows, including water miscibility, hydrogen bonding, and hygroscopicity.
| Property | Typical value |
|---|---|
| Chemical name | Ethylene glycol / Mono ethylene glycol (MEG) |
| CAS No. | 107-21-1 |
| Molecular formula | C2H6O2 |
| Molecular weight | 62.07 g/mol |
| Appearance | Clear, colorless liquid |
Key Physical Properties of Ethylene Glycol
The physical properties that matter most in practice are density, melting and boiling points, water solubility, viscosity, and hygroscopicity.
| Property | Typical value |
|---|---|
| Density | About 1.11 g/cm3 |
| Melting point | About -13 degrees Celsius |
| Boiling point | About 197 degrees Celsius |
| Water solubility | Completely miscible |
| Viscosity | Relatively low |
| Hygroscopicity | Yes |
Ethylene glycol is completely miscible with water, meaning it mixes in essentially any ratio without separating. The two hydroxyl groups hydrogen-bond readily with water, which is what makes full miscibility possible. A water-ethylene glycol blend therefore behaves as a single, stable liquid rather than something that needs agitation or risks splitting into layers, a detail that matters when formulating antifreeze or coolant.
Chemical Properties and Characteristics
The most important chemical characteristic of ethylene glycol is the presence of two primary hydroxyl groups. These groups make the molecule reactive toward acids and acid derivatives, which is the basis of ester and polyester formation. The reaction of ethylene glycol with terephthalic acid or dimethyl terephthalate produces polyethylene terephthalate, the polymer behind bottles, films, and polyester fibers.
Ethylene glycol is also hygroscopic, pulling moisture from the air readily. That is not a flaw so much as something to plan around: an open or poorly sealed container will pick up water over time, shifting the actual water content away from specification. This is the main reason storage instructions emphasize keeping containers tightly closed.
How Properties Drive Industrial Applications
A low freezing point is the basis of freeze protection. Mixed into water, ethylene glycol keeps the resulting solution liquid well below zero degrees Celsius, which is why it is the standard base of automotive antifreeze and industrial coolants. On the other end, its high boiling point keeps coolant from boiling off under heat, so the same molecule handles both winter and summer duty in a cooling system.
Density matters when blending product, because quantity and ratio calculations are based on it. Viscosity plays into circulation: the relatively low viscosity of ethylene glycol means it pumps and moves through a system without the drag that thicker fluids introduce, keeping heat-transfer efficiency where it needs to be. In PET production, purity and the control of co-products such as diethylene glycol and triethylene glycol are what determine polymer quality.
Specifications Buyers Should Check
Before ordering ethylene glycol, buyers should confirm the grade, which is the primary factor in suitability for any given use. Water content affects processing accuracy and shelf stability. DEG and TEG content matters most for PET and polyester production, where these co-products can affect polymer properties. Color is relevant wherever the finished product's appearance matters, PET resin especially, and acidity affects process control and long-term equipment compatibility.
Required specifications are not identical across applications. PET-grade ethylene glycol typically calls for tighter purity and DEG or TEG limits than general coolant blending does. Buyers should confirm the grade and quality parameters that match their process before ordering rather than assuming one purity level covers every use case.
Frequently Asked Questions
What are the main properties of ethylene glycol?
Ethylene glycol is a clear, colorless liquid that is completely miscible with water, with a density near 1.11 g/cm3, a melting point near -13 degrees Celsius, and a boiling point near 197 degrees Celsius.
What is the CAS number of ethylene glycol?
The CAS number of ethylene glycol is 107-21-1, and its molecular formula is C2H6O2.
Why is ethylene glycol used in antifreeze?
Ethylene glycol is completely miscible with water and depresses the freezing point of the mixture, while its high boiling point also protects against overheating.
Is ethylene glycol soluble in water?
Yes, ethylene glycol is completely miscible with water in essentially any ratio, thanks to hydrogen bonding between its hydroxyl groups and water.
Why is ethylene glycol hygroscopic?
The two hydroxyl groups attract water molecules, so ethylene glycol absorbs moisture from the air. Containers must be kept tightly closed to maintain specification.
What is ethylene glycol used for in industry?
Ethylene glycol is used in antifreeze, coolants, heat transfer fluids, and as a monomer in PET and polyester production, among other applications.





