Acrylic acid is a colorless, transparent liquid with a pungent, fruity odor and the chemical formula C3H4O2 (CH2=CHCOOH). It is the simplest unsaturated carboxylic acid and one of the most important chemical intermediates in the polymer industry. Because it combines a carboxylic acid group with a vinyl group, acrylic acid participates in both acid-base chemistry and addition polymerization, which makes it the building block for a wide family of water-soluble polymers.
What Is Acrylic Acid?
Acrylic acid, also known as prop-2-enoic acid, has the CAS registry number 79-10-7. Its molecule contains a carbon-carbon double bond adjacent to a carboxyl group, giving it dual reactivity: the carboxyl group provides acidity and water compatibility, while the double bond enables free-radical polymerization. This combination underpins its use in superabsorbent polymers, coatings, adhesives, textiles and water treatment chemicals.
Physical Properties of Acrylic Acid
| Property | Value |
|---|---|
| Appearance and state | Colorless liquid, fruity odor |
| Density | 1.042 g/cm3 |
| Melting point | -52 °C |
| Boiling point | 189 °C |
| Flash point | 76 °C (closed cup) |
| Refractive index | 1.449 - 1.451 |
| Water solubility | 0.5 - 1.0 g/100 mL at 20 °C |
| Vapor pressure | 0.582 mmHg at 25 °C |
Acrylic acid is miscible with water in most practical ratios, and its low melting point keeps it liquid under normal storage conditions. The flash point of 76 °C places it in the combustible liquid category, so it must be handled away from ignition sources.
Chemical Properties of Acrylic Acid
Acrylic acid is a moderately strong organic acid with a pKa of 4.25, which means it dissociates significantly in water and can be neutralized by bases to form acrylate salts. The carboxyl group also undergoes esterification with alcohols to produce acrylate esters such as methyl acrylate and butyl acrylate, which are widely used monomers. Under typical conditions acrylic acid is resistant to oxidation and hydrolysis, giving it good chemical stability in storage when properly inhibited.
Polymerization and Industrial Relevance
The double bond of acrylic acid polymerizes readily by free-radical mechanisms to form polyacrylic acid and, with other monomers, copolymers such as polymethylacrylic acid. These polymers show excellent water absorption and structural stability, which is why they are used in hydrogels, superabsorbent products, coatings, inks, adhesives, thickeners and dispersants. The ability to tune polymer properties by copolymerization makes acrylic acid a versatile feedstock for the chemical industry.
Stability and Storage Requirements
Although chemically stable, acrylic acid is prone to spontaneous polymerization, especially at elevated temperature, in the presence of light, or when exposed to peroxides. Commercial material is therefore stabilized with around 100 ppm of MEHQ (hydroquinone monomethyl ether) and should be refrigerated in the original container. Storage conditions should avoid direct sunlight, strong oxidizers and heat sources, and the inhibitor content should be checked before long-term storage or polymerization use.
Frequently Asked Questions
What is the CAS number of acrylic acid?
The CAS registry number of acrylic acid is 79-10-7, and its molecular formula is C3H4O2.
Is acrylic acid a strong acid?
Acrylic acid is a moderately strong organic acid with a pKa of 4.25, weaker than mineral acids but stronger than acetic acid, which has a pKa of 4.76.
Is acrylic acid soluble in water?
Yes, acrylic acid is miscible with water and can form water-soluble polymers such as polyacrylic acid.
Why is MEHQ added to acrylic acid?
MEHQ is added at around 100 ppm as a polymerization inhibitor. It scavenges free radicals and prevents premature polymerization during storage and transport.
What polymers are made from acrylic acid?
Polyacrylic acid, polymethylacrylic acid and various acrylate copolymers are produced, with applications in hydrogels, coatings, inks, adhesives and superabsorbents.
How should acrylic acid be stored?
Store refrigerated in tightly sealed containers, protected from light and away from oxidizers, heat sources and ignition sources.





