Jan 22, 2026 Leave a message

What Is the Molecular Weight of Dimethylformamide (DMF, CAS 68-12-2)?

Quick answer: The molecular weight of N,N-dimethylformamide (DMF, CAS 68-12-2) is 73.09 g/mol (more precisely 73.095 g/mol), corresponding to the molecular formula C₃H₇NO. This value comes directly from the sum of its atomic masses and is constant across all commercial grades of the compound - purity level does not change the molecular weight, only how much non-DMF material (typically water) is mixed in.

 

 

What Is N,N-Dimethylformamide?

 

N,N-Dimethylformamide is a polar aprotic solvent widely used across the pharmaceutical, chemical, and materials industries. It's especially prominent in the manufacture of synthetic (PU) leather, polyacrylonitrile (acrylic) fibers, pharmaceutical intermediates, and as a reaction solvent and reagent in organic synthesis, including the Vilsmeier-Haack formylation reaction. Its strong polarity and ability to dissolve both organic and many inorganic compounds - including polymers like polyacrylonitrile and PVC - have earned it a reputation as a near-universal industrial solvent.

 

Dimethylformamide Uses

 

 

DMF Key Data Summary

 

Parameter Value
Chemical Name N,N-Dimethylformamide
Common Abbreviation DMF
CAS Number 68-12-2
EC (EINECS) Number 200-679-5
PubChem CID 6228
Molecular Formula C₃H₇NO
Molecular Weight 73.09 g/mol
Appearance Colorless to light yellow liquid
Odor Faint, ammonia-like or fishy odor (more noticeable when impure)
Solvent Type Polar aprotic solvent

 

 

N,N-Dimethylformamide (DMF) Physical and Chemical Properties

 

Property Value
Density (20°C) ~0.944-0.948 g/cm³
Boiling Point 153°C
Melting Point -61°C
Flash Point (closed cup) 58°C
Vapor Density (air = 1) 2.5
Vapor Pressure (20°C) ~2.6-3.9 mmHg
Water Solubility Miscible in all proportions
Autoignition Temperature 435-445°C
Refractive Index (20°C) ~1.4305

 

Solubility: DMF is highly polar and miscible with water, alcohols, ethers, esters, ketones, halogenated hydrocarbons, and aromatic hydrocarbons. It also dissolves many polymers, including polyacrylonitrile and polyvinyl chloride, which is why it's sometimes called a "universal solvent" in industrial contexts.

 

Stability: DMF is thermally stable at its boiling point in the absence of strong acids or bases, but decomposes above roughly 350°C to form carbon monoxide and dimethylamine - this is why industrial distillation of DMF is typically carried out under reduced pressure at lower temperatures rather than at atmospheric boiling point. In aqueous solution, prolonged boiling hydrolyzes DMF into formic acid and dimethylamine. It also forms stable complexes with hydrochloric acid and various heavy metal salts.

 

 

DMF vs. DMAc vs. NMP: Molecular Weight Comparison

 

DMF is frequently compared with two other polar aprotic solvents used in similar applications - N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) - since all three are common in fiber spinning, coatings, and pharmaceutical processing.

 

Solvent CAS Number Molecular Formula Molecular Weight
DMF 68-12-2 C₃H₇NO 73.09 g/mol
DMAc 127-19-5 C₄H₉NO 87.12 g/mol
NMP 872-50-4 C₅H₉NO 99.13 g/mol

 

The molecular weight difference matters practically: for the same target molar concentration, DMAc and NMP require proportionally more mass per liter than DMF, since their molar masses are higher.

 

 

Safety and Regulatory Classification

 

DMF carries safety considerations that are directly relevant to how it's handled and stored, and are worth noting alongside its physical data:

 

  • GHS Classification: Classified as Flammable Liquid Category 3, Acute Toxicity Category 4 (dermal and inhalation), Eye Irritation Category 2, and Reproductive Toxicity Category 1B (Repr. 1B).
  • REACH SVHC Status: DMF is included on the ECHA Substances of Very High Concern (SVHC) candidate list in the European Union due to its classification as toxic to reproduction.
  • Occupational Exposure Limits: OSHA PEL and NIOSH REL are both set at 10 ppm (TWA), with a skin notation indicating significant dermal absorption risk. The NIOSH IDLH (immediately dangerous to life or health) value is 500 ppm.
  • Carcinogen Classification: IARC lists DMF in Group 2B (possibly carcinogenic to humans).
  • Flammability: DMF is a combustible/flammable liquid with a flash point of 58°C, and its vapors - heavier than air - can travel to an ignition source and flash back.

 

Because DMF is readily absorbed through the skin and can increase the hazard of other toxic substances it dissolves, handling should always follow the current Safety Data Sheet (SDS), with appropriate gloves, ventilation, and eye protection.

 

N,N-dimethylformamide (DMF, CAS 68-12-2)

 

Frequently Asked Questions

 

What is the exact molecular weight of DMF?

73.095 g/mol, based on the molecular formula C₃H₇NO. It's commonly rounded to 73.09 or 73.1 g/mol in technical documentation.

 

Does DMF purity affect its molecular weight?

No. Molecular weight is a fixed physical constant of the pure compound. Purity (e.g., 99%, 99.8%, anhydrous grade) affects how much water or other impurity is present in the product, not the molecular weight of the DMF molecule itself.

 

How is DMF's molecular weight used in practice?

It's primarily used to convert between mass and moles - for example, calculating how many grams of DMF are needed to prepare a solution of a specific molar concentration, or converting between DMF's density and its theoretical vapor density.

 

Is DMF the same as DMAc or NMP?

No. All three are polar aprotic solvents used in overlapping applications (fiber spinning, coatings, pharmaceutical synthesis), but they are distinct compounds with different molecular weights, boiling points, and regulatory profiles. DMAc (87.12 g/mol) and NMP (99.13 g/mol) both have higher molecular weights than DMF (73.09 g/mol).

 

Is DMF hazardous to handle?

Yes. DMF is classified as a reproductive toxicant (Repr. 1B) and is readily absorbed through the skin, in addition to being flammable. It appears on the EU's SVHC candidate list, and occupational exposure limits (OSHA/NIOSH) are set at 10 ppm TWA. Always consult the current SDS before handling.

 

What is DMF's CAS number and PubChem CID?

CAS Number: 68-12-2. PubChem CID: 6228. EC (EINECS) Number: 200-679-5. These identifiers are the most reliable way to confirm you're sourcing or referencing the correct compound.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry