Nov 04, 2025 Leave a message

Is P-Xylene Soluble in Water? CAS 106-42-3 Properties Explained

P-Xylene (CAS 106-42-3), commonly known as para-xylene or 1,4-dimethylbenzene, is one of the three dimethylbenzene isomers together with ortho-xylene and meta-xylene. It is a fundamental aromatic hydrocarbon in the petrochemical value chain and a direct precursor to purified terephthalic acid (PTA), which is the building block of polyester. Understanding its solubility behavior is essential for process design, solvent selection, waste handling, and laboratory practice.

What Is P-Xylene (CAS 106-42-3)?

P-Xylene is an aromatic hydrocarbon with the molecular formula C8H10 and a molecular weight of 106.17 g/mol. At room temperature it is a colorless, transparent liquid with a characteristic aromatic odor. It is produced primarily through catalytic reforming of naphtha and toluene disproportionation, followed by separation from the other xylene isomers by adsorption or crystallization.

The para-positioning of the two methyl groups gives p-xylene a highly symmetrical molecular structure, which is the reason for its relatively high melting point compared with the other isomers and its key role as a chemical intermediate rather than a simple fuel component.

Solubility of P-Xylene in Water

The short answer is no: p-xylene is practically insoluble in water. Its water solubility at 20-25°C is approximately 0.19 g/L (about 190 mg/L), which is negligible for most practical purposes. This behavior is explained by the nonpolar aromatic ring and the two methyl groups, which give the molecule a strongly hydrophobic character and prevent effective interaction with polar water molecules through hydrogen bonding.

By contrast, p-xylene is fully miscible with most common organic solvents, including ethanol, diethyl ether, acetone, chloroform, benzene, and toluene. This high compatibility with nonpolar and moderately polar solvents makes p-xylene a versatile diluent and reaction medium in coatings, resins, and extraction processes.

Key Physical and Chemical Properties

Property Value
CAS Number 106-42-3
Molecular Formula C8H10
Molecular Weight 106.17 g/mol
Appearance Colorless transparent liquid
Melting Point 13.2°C
Boiling Point 138.4°C
Density (20°C) 0.861 g/cm3
Flash Point 25°C (closed cup)
Water Solubility (25°C) Approximately 0.19 g/L
Vapor Pressure (20°C) Approximately 0.9 kPa

Industrial Applications of P-Xylene

The dominant use of p-xylene is oxidation to purified terephthalic acid (PTA), which is subsequently polymerized with ethylene glycol to produce polyethylene terephthalate (PET). PET is used in polyester fibers for textiles, PET bottles for beverages, and packaging films. This single chain accounts for the majority of global p-xylene consumption.

Beyond polyester, p-xylene is used in the production of coatings, paints, and inks as a solvent and diluent, in dye and pigment manufacturing, and as an intermediate in the synthesis of agricultural chemicals and pharmaceuticals. In analytical laboratories, high-purity p-xylene serves as a chromatographic standard and as a solvent in organic synthesis and extraction procedures.

Safe Handling, Storage, and Environmental Notes

P-xylene is a flammable liquid and must be stored away from ignition sources, in grounded containers, and in well-ventilated areas. Its flash point of about 25°C means vapors can form flammable mixtures at ambient temperature. Personal protective equipment, including chemical-resistant gloves and safety goggles, is recommended, and local exhaust ventilation should be used where vapor exposure is possible.

Because p-xylene is not water-soluble, spills cannot be washed away with water; they should be contained and absorbed with inert materials such as sand or vermiculite. Waste must be disposed of in accordance with local environmental regulations for aromatic hydrocarbon waste. Occupational exposure limits are established in many jurisdictions, and air monitoring is advised in workplaces handling the compound.

Frequently Asked Questions

Does p-xylene float on water?

Yes. With a density of about 0.861 g/cm3, p-xylene is lighter than water and will form a separate organic layer floating on the water surface if the two are mixed. This is why spills near waterways create a surface film that must be contained with booms.

Is p-xylene the same as xylene?

No. Commercial xylene is usually a mixture of the three isomers, ortho-xylene, meta-xylene, and para-xylene, plus ethylbenzene. P-xylene is the pure para-isomer with CAS 106-42-3, valued mainly as the feedstock for PTA and polyester production.

Why is p-xylene insoluble in water?

Water is a polar, hydrogen-bonding solvent, while p-xylene is a nonpolar aromatic hydrocarbon. The weak van der Waals interactions between p-xylene and water molecules cannot compensate for the strong hydrogen bonding that water molecules maintain among themselves, so the two liquids are immiscible.

Can p-xylene dissolve in ethanol or acetone?

Yes. P-xylene is fully miscible with ethanol, acetone, ether, chloroform, and many other organic solvents, which makes it useful as a diluent and reaction medium in coatings, resins, and extraction systems.

What is the most important use of p-xylene?

The oxidation of p-xylene to purified terephthalic acid (PTA) and the subsequent production of polyethylene terephthalate (PET) is the dominant application, supplying the polyester fiber, bottle, and film industries.

Is p-xylene hazardous to health?

Prolonged or high-level exposure to p-xylene vapors can cause central nervous system depression, headache, and respiratory irritation. It is classified as a flammable liquid and should be handled with proper ventilation, personal protective equipment, and adherence to occupational exposure limits.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry