Two Different Chemicals, Similar Names
Caustic soda is sodium hydroxide, NaOH, CAS 1310-73-2. Baking soda is sodium bicarbonate, NaHCO3, CAS 144-55-8. The names are similar and both products are white solids sold in bags, but the two substances differ in formula, molar mass, alkalinity, solubility and hazard classification. Sodium hydroxide is a strong, fully dissociated base; sodium bicarbonate is a weak base that partially hydrolyses in water and releases only a small fraction of its alkalinity at any time. Substituting one for the other in a process will not simply shift a dose: it will change pH by several units, change reaction products and, in many cases, create an unsafe condition.
Property Comparison
| Property | Caustic soda (NaOH) | Baking soda (NaHCO3) |
|---|---|---|
| CAS number | 1310-73-2 | 144-55-8 |
| Molar mass | 40.00 g/mol | 84.01 g/mol |
| Base strength | Strong base, fully dissociated | Weak base, partial hydrolysis |
| pH of a 1 percent solution | approx. 13 | approx. 8.3 |
| Solubility in water at 20 °C | approx. 1090 g/L | approx. 96 g/L |
| Behaviour on heating | Stable, melts near 318 °C | Decomposes above about 50 °C to carbonate, carbon dioxide and water |
| Commercial forms | Flakes, pearls, solid, 50 percent solution | Powder, granular, food grade |
| Food use | Not used directly as an ingredient | Food additive and leavening agent |
Chemistry Differences That Matter in Production
Sodium hydroxide dissolves in water with a strong exotherm, and the resulting solution is highly alkaline and saponifies fats, denatures proteins and dissolves aluminium. This is the basis of its roles in pulp and paper, alumina refining, soap making, textile scouring, bottle washing, water treatment pH correction and chemical synthesis. Its equivalence of alkalinity is one mole of hydroxide per mole of solid, which makes dosing calculations straightforward: the reactive hydroxide is available immediately and completely.
Sodium bicarbonate behaves differently in three ways. First, only a fraction of it is hydrolysed at equilibrium, so a given mass of bicarbonate gives far less free hydroxide than the equivalent mass of caustic. Second, it buffers: added acid consumes bicarbonate and converts it to carbon dioxide and water rather than dropping the pH abruptly, which is why it is used for mild neutralisation and for controlling pH in a narrow range. Third, it decomposes on heating, releasing carbon dioxide and leaving sodium carbonate. That decomposition is the reason it works as a leavening agent and as a dry chemical agent in fire extinguishers, and it is also why it must not be heated in a sealed system. In flue gas cleaning, bicarbonate is injected dry or in slurry form where carbon dioxide release and solid salt formation help capture acidic gases.
Grades, Specifications and Trading Practice
Industrial sodium hydroxide is traded against a defined caustic content with limits on sodium carbonate, sodium chloride and iron. Flakes are normally specified at 98 to 99 percent sodium hydroxide, and the liquid grade is a 50 percent solution that must be kept above roughly 12 °C to avoid crystallisation, which in practice means heated storage and trace heating on transfer lines. Test methods such as ASTM E291 cover the chemical analysis of caustic soda and caustic potash, and the Chinese industrial standard for sodium hydroxide is GB 209. Sodium bicarbonate for food contact must meet a food additive monograph that limits heavy metals, arsenic and insoluble matter, and it is handled with the hygiene controls of a food ingredient rather than those of a bulk industrial chemical. Both are hygroscopic: caustic soda is strongly deliquescent and will absorb moisture and carbon dioxide from air, forming a carbonate crust if bags are left open.
Safety and Storage Contrast
Caustic soda is corrosive. Contact with eyes can cause permanent damage, contact with skin produces deep burns, and inhalation of dust or mist damages the respiratory tract. Handling requires face and eye protection with a face shield, chemical protective clothing, gauntlets, and immediate access to an eyewash and safety shower. Addition of solid caustic or dilution of the 50 percent solution must always be carried out by adding the material to water with cooling, never by adding water to concentrated caustic, because the heat of solution can boil the mixture and cause violent spattering. Storage is in steel or polyethylene vessels, keeping the material dry and away from acids, aluminium and chlorinated solvents. Baking soda is a mild irritant rather than a corrosive: it does not burn skin, but dust irritates eyes and airways, and the main concerns in storage are moisture pickup and caking. It is stored in dry, closed containers away from acids, since acid contact causes vigorous effervescence.
Frequently Asked Questions
Q: Can baking soda be used to replace caustic soda in a cleaning formulation?
A: No. Sodium bicarbonate is far less alkaline and cannot saponify fats or attack the soils that caustic soda removes. It can act as a mild buffering or abrasive component but not as the active alkali.
Q: Are caustic soda and baking soda both called soda in industry?
A: The word soda appears in both names, but caustic soda means sodium hydroxide and baking soda means sodium bicarbonate. They also differ from soda ash, which is sodium carbonate, and from washing soda, which is the decahydrate of sodium carbonate.
Q: What happens if caustic soda contacts aluminium?
A: Sodium hydroxide dissolves the protective oxide layer and reacts with aluminium to release hydrogen gas. Aluminium vessels, fittings and swarf must never be allowed to contact caustic solutions.
Q: Why does a 50 percent caustic soda solution solidify in cold weather?
A: The 50 percent solution saturates near 12 °C, so sodium hydroxide crystallises out below that temperature. Tanks, pumps and lines are therefore insulated and trace heated.
Q: Can baking soda be used to neutralise a caustic spill?
A: It will neutralise the alkali but generates carbon dioxide and heat, and the reaction can foam. Trained responders normally use a controlled acid neutralisation with cooling, followed by testing of the runoff before disposal.
Q: Is bicarb a food additive while caustic soda is not?
A: Correct in practice. Sodium bicarbonate holds a food additive monograph and is used in baking and beverage applications, whereas sodium hydroxide is used in food processing only as a processing aid under strict rinse and control requirements.





