May 15, 2025 Leave a message

How Much TCCA 90 to Add in a Swimming Pool?

Trichloroisocyanuric acid, known as TCCA, is one of the most popular disinfectants for swimming pools. Its stabilized chlorine slowly dissolves in water and keeps pools safe from bacteria and algae. But how much TCCA 90 should you actually add? The answer depends on the volume of the pool, the current chlorine level and a few practical factors. This article explains the chemistry, the calculation method and the safety rules.

What Is TCCA 90?

TCCA, or trichloroisocyanuric acid, is a chloroisocyanuric acid compound with the formula C3O3N3Cl3 and CAS number 87-90-1. It is a white crystalline powder or slow-dissolving tablet with a strong chlorine odor. TCCA is slightly soluble in water and easily soluble in organic solvents.

The active chlorine content of TCCA 90 is above 90%, which is two to three times higher than that of bleaching powder. Because it is stabilized with cyanuric acid, it resists degradation by sunlight and keeps working for much longer than unstabilized chlorine.

How Does TCCA 90 Disinfect Pool Water?

When TCCA 90 dissolves in water, it hydrolyzes to produce hypochlorous acid. Hypochlorous acid attacks bacterial cell walls and virus shells, causing the organisms to lyse. It then penetrates into the cells, oxidizes essential enzymes and kills the bacteria. This makes TCCA effective against bacteria, viruses and algae in pool water.

The cyanuric acid released during hydrolysis acts as a chlorine stabilizer, protecting the free chlorine from rapid breakdown by ultraviolet light. This is why TCCA is preferred for outdoor pools.

How Much TCCA 90 to Add: Dosage Guidelines

The appropriate amount of TCCA 90 depends on several factors, including the pool size, water volume, current chlorine level, water temperature, bather load and sunlight exposure. The first step is always to calculate the pool volume in cubic meters by multiplying length, width and average depth.

As a general starting point for routine maintenance, many operators use one 200 g tablet of TCCA 90 per 40 m3 of water per week, which keeps the free chlorine in the recommended 1-3 ppm range under normal conditions. For example, a 38 m3 pool would typically need about two 100 g tablets or one 200 g tablet per week, adjusted according to test results.

For shock treatment, when the water is cloudy, heavily used or contaminated, a higher dose is required, typically in the range of 10-15 g of TCCA 90 per m3 of water, applied once. After shocking, do not swim until the free chlorine level falls back to 1-3 ppm.

These figures are practical guidelines, not a substitute for testing. Always measure the free chlorine with a reliable test kit and adjust the dose to keep the level within the range recommended by WHO guidelines for safe recreational water, generally 1-3 mg/L free chlorine in pools.

Factors That Affect the Required Dose

The dose needed on any given day depends on several variables:

Bather load: more swimmers consume more chlorine.

Water temperature: warmer water increases chlorine demand and microbial growth.

Sunlight: outdoor pools lose chlorine faster unless cyanuric acid is present.

Rain and debris: heavy rain or organic contamination creates chlorine demand.

Algae outbreaks: visible algae requires shock treatment before routine maintenance resumes.

Step-by-Step Application Guidelines

Follow these steps for safe and effective dosing:

Test the water first to measure the current free chlorine level and pH; adjust pH to the ideal 7.2-7.6 range.

Add the tablets in the evening or when the pool is not in use, using a floating dispenser or the skimmer basket.

Distribute the dose across the pool and run the circulation pump for several hours to mix the water.

Retest after 4-6 hours and adjust if the free chlorine is outside the 1-3 ppm range.

Do not swim until the free chlorine level is confirmed to be within the safe range.

Safety Precautions When Handling TCCA

TCCA is a strong oxidizer and must be handled with care:

Never mix TCCA with acids, other chlorine products or any other pool chemicals, because dangerous reactions and toxic gases can result.

Keep the product dry: do not add water to the chemical; add the chemical to the water according to the label.

Wear gloves and eye protection when handling tablets or powder.

Store TCCA in a cool, dry, ventilated area, away from combustible materials and out of reach of children.

Dissolve only the amount needed and never pre-dissolve large quantities in closed containers.

Frequently Asked Questions

How much TCCA 90 should I add to my pool?

As a general guide, use about one 200 g tablet per 40 m3 per week for routine maintenance and 10-15 g per m3 for shock treatment, then adjust according to free chlorine test results.

How often should TCCA 90 be added?

Typically once a week for maintenance, but the frequency depends on bather load, temperature and sunlight. Test the water regularly and dose as needed to keep free chlorine at 1-3 ppm.

What free chlorine level should a pool maintain?

WHO guidelines for safe recreational water recommend maintaining free chlorine at 1-3 mg/L in swimming pools.

Can TCCA 90 be mixed with other pool chemicals?

No. TCCA must never be mixed with acids or other chlorine products, as this can cause violent reactions and release toxic gases.

How long after adding TCCA 90 can I swim?

Wait until the free chlorine level is confirmed to be within the safe 1-3 ppm range, usually several hours after dosing, and always retest before allowing swimmers into the pool.

What is the difference between TCCA 90 and liquid bleach?

TCCA 90 is a stabilized, slow-dissolving solid chlorine with more than 90% available chlorine, while liquid bleach is unstabilized and degrades quickly in sunlight.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry