Mono Ethylene Glycol (MEG, CAS 107-21-1) is supplied by Tianjin Gnee Biotech Co., Ltd. with 99.9% high-purity grade, full EU REACH registration, and ISO 9001 certification, supporting stable bulk supply for global polyester, antifreeze, and industrial chemical applications.
MEG is widely used as a key chemical intermediate in PET production, antifreeze systems, and industrial processing, where consistent purity and impurity control are essential for stable downstream performance.
Premium Quality & Regulatory Compliance for Global Buyers
MEG is produced in accordance with GB/T 4649-2018 polyester-grade standards and is fully REACH-registered for EU market access. The product is designed to meet strict industrial requirements for polymerization and chemical stability.
Product information:
- Product name:Mono Ethylene Glycol
- CAS No.:107-21-1
- EINECS No:203-473-3
- Purity ≥99.9%
- Moisture ≤0.08%
- DEG content ≤0.05%
- Iron ≤0.1 mg/kg
- Chloride/Sulfate ≤20 ppm
Physical and Technical Properties of MEG
|
Property |
Value |
Unit |
|---|---|---|
|
Chemical Formula |
C₂H₆O₂ |
- |
|
Molecular Weight |
62.07 |
g/mol |
|
Density (20°C) |
1.112–1.115 |
g/cm³ |
|
Boiling Point |
196–199 |
°C |
|
Freezing Point |
-13 |
°C |
|
Viscosity (20°C) |
~16.1 |
mPa·s |
|
Flash Point |
111 |
°C |
|
Solubility |
Fully miscible |
- |
Quality standard
|
ITEM |
SPECIFICATION |
|
APPEARANCE |
COLORLESS TRANSPARENT LIQUID |
|
DENSITY G/CM3 |
1.112-1.115 |
|
PURITY |
99.8% MIN |
|
DIETHYLENE GLYCOL CONTENT |
0.05% MAX |
|
WATER CONTENT |
0.08% MAX |
|
ACIDITY (AS ACETIC ACID) |
0.001% MAX |
|
ASH |
0.001% MAX |
|
COLOR(APHA) |
10 MAX |
mono ethylene glycol uses
Polyester grade MEG is required for PET production, industrial grade is used for antifreeze, and technical grade is suitable for cost-sensitive non-critical applications.
- Polyester grade MEG (≥99.9%) is required for PET fiber, film, and bottle production due to strict purity requirements and low moisture demand (<0.05%).
- Industrial grade MEG (≥99.0%) is commonly used in automotive antifreeze systems where standard corrosion protection and thermal stability are sufficient.
- Technical grade MEG (98–99%) is suitable for non-critical industrial uses such as gas dehydration and deicing, where cost efficiency is prioritized over ultra-high purity.
